• BNC
• Combo
• etherCON
• opticalCON
• opticalCON powerMONITOR
• opticamSWITCH
• Phono/RCA
• powerCON
• speakON
• XLR
• Circular Connectors
• Plugs & Jacks
• Mechanical
• Material and Plating
• Standards and Approvals
• Environmental Protection
• Patch Panels
• Transmission
• Application of the devices and accessories
• Sofware and Firmware-Update
• Service and technical support

• How can I color code my BNCs?
• Does Neutrik also offer 50 Ohm BNC connectors?
• Benötige ich spezielle oder neue Crimpwerkzeuge?
• What can I do when my preferred coax cable isn’t on the cable reference list?
• How important is shielding on a BNC connector?
• Are Neutrik BNC connectors true 75 Ohm connectors and are they suitable for HDTV?
• What are BNC connectors and what are they used for?
• Which BNC – stripper can I use for COAX cables?

• What is a Combo and what is it used for?
• How do the switching contacts of the Combo work?
• Are the XLR contacts on the Combo connected with the TRS contacts?

• Conformity of the etherCON chassis connectors
• What is a RJ45 etherCON connector and where is it used?
• Do the etherCON IDC chassis connectors accept stranded and solid wires?
• Do the RJ45 etherCON cable connectors NE8MC* come with the RJ45 plug?
• What is the max. panel thickness on the D-series etherCON?
• Do I have to order etherCON mounting screws seperately?

• How can I clean the opticalCON chassis connectors?
• Can I use my own drum on opticalCON cables?
• What are typical Insertion and Return Loss values for opticalCON DUO, QUAD and MTP connections?
• In case of a defective connector, is there a way to repair my cable in the field?
• Can I buy opticalCON connectors without additional training?
• What is the maintenance interval for opticalCON cables?
• Should I use breakout cables to connect my device?
• Is it possible to mix up 50µm and 62.5µm fiber cables?
• How can I breakout my multichannel cable as the opticalCON QUAD or MTP?

• How is the opticamSWITCH connected?
• What happens in case of a defective power supply?
• How can I control the opticamSWITCH?
• What is the maintenance interval on the opticamSWITCH?
• Can I add further opticamSWITCH devices to my existing installation?
• How does the fiber routing works?

• What is a PROFI connector and what is it used for?

• What are powerCON connectors and what are they used for?
• Why are there two different (keyed) versions of the 20 A powerCON?
• How do I wire my cable onto my 20 A powerCON?
• May I plug / unplug a powerCON 20 A or 32 A cable connector under load?
• Which screws/rivets can I use for fastening of powerCON chassis connectors?
• Does Neutrik offer isolated Faston tabs to wire powerCON and speakON chassis connectors?

• What is a speakON connector and what is it used for used for?
• What is BI-AMP?
• Does Neutrik offer a male cable connector for extension cables?
• Which screws/rivets can I use for fastening of chassis connectors?
• How do I wire my cable onto my speakON?
• Where can I obtain Faston tabs to wire speakON chassis connectors?
• Is the speakON STX series compatible to standard speakONs?

• What is an XLR connector and what is it used for?
• How do I wire my cable onto my 3 pole XLR (pin configuration)?
• Why does my 6 pole XLR not fit into the Neutrik 6 pole XLR?
• Can I use the Neutrik XLR cable connectors for digital AES/EBU Signals?
• How can I remove/lock the insert of the D-Series?
• Can the latch of a XLR chassis connector be removed and replaced?
• Which screws/rivets can I use for fastening of chassis connectors?
• Which connector is suitable for miniature XLR connections?

• What are circular connectors and what are they used for?
• Do I have to order the housings, inserts and contacts of the miniCON and neutriCON separately?
• What type of crimp is used for the crimp contacts on neutriCON and miniCON?

• What are Jacks & Plugs and what are they used for?
• There are different types of plugs. When do I use which one?
• Is it possible to transmit digital data with plugs and jacks?
• The value "Rated current per contact" is not defined in the technical info. Why?
• Which 1/4" plug should be used for patch panels?
• Why do I have a low signal on my 1/4" plug?
• How can I convert balanced (TRS) signals into unbalanced (TS, guitar) signals?
• What is the difference between switched and unswitched jacks?

• Where can I get punching tools to produce D size panel cutouts?

• Original Neutrik product or copy? The hologram technology sheds light on it.
• Are the plastics, which you use for inserts etc., free of halogen?
• Does tarnishing of silver contacts affect the contact resistance?
• Do black chrome shells have grounding disadvantages?

• Do connectors need a CE mark?

• What about hazardous substances in Neutrik products?

• What are Patch Panels and what are they used for?
• How do patch panels work and what types does Neutrik offer?
• Which type of patch cables should I use?
• Is it possible to use digital (AES/EBU) audio signals with Neutrik patch panels?
• Can digital audio signals and analog signals be routed through a Neutrik patch panel at the same time?
• Can I run phantom powered microphone signals through patch panels? Which one should I use?
• What is the best way to pass a phantom powered microphone signal through a patch panel?

• What does DIWA stand for?
• On which channel is the system working?
• Is it possible to select a specific channel for the transmission?
• What about latency?
• Within which range is the system working?
• How big is the transmission power?
• How safe is the transmission?
• What is Forward Error Correction?
• How does the Concealment algorithm work?
• What is meant by switched diversity?
• What happens to the audio signal when I leave the range or if there is an interruption?
• Do other users of this frequency band have an influence on the transmission quality (Smartphones, Accesspoints etc.)?
• What is meant by "sounds like a cable"?
• What is the advantage compared to a UHF transmission?

• What do I have to consider concerning the setup of the devices?
• Is there a visual indication of the signal strength?
• Is there an official channel request necessary?
• Why is the base station required?
• Is it possible to setup a direct connection between the mobile units?
• How many cable runs can be replaced by using the product?
• When do I need remote antennas?
• How do I choose the proper combination of antenna and cable?
• How many hours do the mobile units operate with batteries?
• How many hours do the touring devices operate with the battery pack?
• How much time does it take to setup a connection?
• What about time and money savings compared to a cable?
• Where can I implement a XIRIUM system (applications)?
• Are there any feedbacks of clients using XIRIUM?
• Has the system been checked by an independent test institution?

• Where can I download the corresponding software?
• Is the XIRIUM Configurator available for Mac as well?
• Is there any difference between controlling the devices by the software or a direct handling?
• How do I know, whether I have the latest firmware?

• Does Neutrik offer support when designing and installing a wireless setup?
• To whom can I apply in case of a defective device?

In times of rising frequencies the connector shielding becomes to an important value in order to avoid EMI problems and crosstalking. The Neutrik BNCs take this fact into account and are equipped with an optimized ground contact design for maximum shielding effectiveness.