- Home
-
All Products
- Neutrik XLRs | XLR Cable XLR Chassis
- Neutrik powerCON | powerCON PoewrCON TRUE1 TOP
- Neutrik etherCON RJ45 | CAT5e CAT6 CAT6a
- Neutrik OpticalCON | OpticalCON Duo OpticalCON Quad OpticalCON MTP
- Neutrik speakON
- Neutrik BNC
- Neutrik Plug and Jacks
- Neutrik Accessories
- Neutrik 8+2 pole XLR
- Neutrik Patch Panel
- REAN XLRs
- REAN Power Connector
- REAN Z-Series
- REAN RJ45s
- News
- About Us
- Contact Us
- Support
- Downloads
- Video
- BNC
- Combo
- etherCON
- opticalCON
- opticalCON powerMONITOR
- opticamSWITCH
- Phono/RCA
- powerCON
- speakON
- XLR
- Circular Connectors
- Plugs & Jacks
- Mechanical
- Material and Plating
- Standards and Approvals
- Environmental Protection
- Patch Panels
- Transmission
- Application of the devices and accessories
- Sofware and Firmware-Update
- Service and technical support
- How can I color code my BNCs?
- Does Neutrik also offer 50 Ohm BNC connectors?
- Benötige ich spezielle oder neue Crimpwerkzeuge?
- What can I do when my preferred coax cable isn’t on the cable reference list?
- How important is shielding on a BNC connector?
- Are Neutrik BNC connectors true 75 Ohm connectors and are they suitable for HDTV?
- What are BNC connectors and what are they used for?
- Which BNC – stripper can I use for COAX cables?
- What is a Combo and what is it used for?
- How do the switching contacts of the Combo work?
- Are the XLR contacts on the Combo connected with the TRS contacts?
- Conformity of the etherCON chassis connectors
- What is a RJ45 etherCON connector and where is it used?
- Do the etherCON IDC chassis connectors accept stranded and solid wires?
- Do the RJ45 etherCON cable connectors NE8MC* come with the RJ45 plug?
- What is the max. panel thickness on the D-series etherCON?
- Do I have to order etherCON mounting screws seperately?
- How can I clean the opticalCON chassis connectors?
- Can I use my own drum on opticalCON cables?
- What are typical Insertion and Return Loss values for opticalCON DUO, QUAD and MTP connections?
- In case of a defective connector, is there a way to repair my cable in the field?
- Can I buy opticalCON connectors without additional training?
- What is the maintenance interval for opticalCON cables?
- Should I use breakout cables to connect my device?
- Is it possible to mix up 50µm and 62.5µm fiber cables?
- How can I breakout my multichannel cable as the opticalCON QUAD or MTP?
- How is the opticamSWITCH connected?
- What happens in case of a defective power supply?
- How can I control the opticamSWITCH?
- What is the maintenance interval on the opticamSWITCH?
- Can I add further opticamSWITCH devices to my existing installation?
- How does the fiber routing works?
- What are powerCON connectors and what are they used for?
- Why are there two different (keyed) versions of the 20 A powerCON?
- How do I wire my cable onto my 20 A powerCON?
- May I plug / unplug a powerCON 20 A or 32 A cable connector under load?
- Which screws/rivets can I use for fastening of powerCON chassis connectors?
- Does Neutrik offer isolated Faston tabs to wire powerCON and speakON chassis connectors?
- What is a speakON connector and what is it used for used for?
- What is BI-AMP?
- Does Neutrik offer a male cable connector for extension cables?
- Which screws/rivets can I use for fastening of chassis connectors?
- How do I wire my cable onto my speakON?
- Where can I obtain Faston tabs to wire speakON chassis connectors?
- Is the speakON STX series compatible to standard speakONs?
- What is an XLR connector and what is it used for?
- How do I wire my cable onto my 3 pole XLR (pin configuration)?
- Why does my 6 pole XLR not fit into the Neutrik 6 pole XLR?
- Can I use the Neutrik XLR cable connectors for digital AES/EBU Signals?
- How can I remove/lock the insert of the D-Series?
- Can the latch of a XLR chassis connector be removed and replaced?
- Which screws/rivets can I use for fastening of chassis connectors?
- Which connector is suitable for miniature XLR connections?
- What are circular connectors and what are they used for?
- Do I have to order the housings, inserts and contacts of the miniCON and neutriCON separately?
- What type of crimp is used for the crimp contacts on neutriCON and miniCON?
- What are Jacks & Plugs and what are they used for?
- There are different types of plugs. When do I use which one?
- Is it possible to transmit digital data with plugs and jacks?
- The value "Rated current per contact" is not defined in the technical info. Why?
- Which 1/4" plug should be used for patch panels?
- Why do I have a low signal on my 1/4" plug?
- How can I convert balanced (TRS) signals into unbalanced (TS, guitar) signals?
- What is the difference between switched and unswitched jacks?
- Original Neutrik product or copy? The hologram technology sheds light on it.
- Are the plastics, which you use for inserts etc., free of halogen?
- Does tarnishing of silver contacts affect the contact resistance?
- Do black chrome shells have grounding disadvantages?
- What are Patch Panels and what are they used for?
- How do patch panels work and what types does Neutrik offer?
- Which type of patch cables should I use?
- Is it possible to use digital (AES/EBU) audio signals with Neutrik patch panels?
- Can digital audio signals and analog signals be routed through a Neutrik patch panel at the same time?
- Can I run phantom powered microphone signals through patch panels? Which one should I use?
- What is the best way to pass a phantom powered microphone signal through a patch panel?
- What does DIWA stand for?
- On which channel is the system working?
- Is it possible to select a specific channel for the transmission?
- What about latency?
- Within which range is the system working?
- How big is the transmission power?
- How safe is the transmission?
- What is Forward Error Correction?
- How does the Concealment algorithm work?
- What is meant by switched diversity?
- What happens to the audio signal when I leave the range or if there is an interruption?
- Do other users of this frequency band have an influence on the transmission quality (Smartphones, Accesspoints etc.)?
- What is meant by "sounds like a cable"?
- What is the advantage compared to a UHF transmission?
- What do I have to consider concerning the setup of the devices?
- Is there a visual indication of the signal strength?
- Is there an official channel request necessary?
- Why is the base station required?
- Is it possible to setup a direct connection between the mobile units?
- How many cable runs can be replaced by using the product?
- When do I need remote antennas?
- How do I choose the proper combination of antenna and cable?
- How many hours do the mobile units operate with batteries?
- How many hours do the touring devices operate with the battery pack?
- How much time does it take to setup a connection?
- What about time and money savings compared to a cable?
- Where can I implement a XIRIUM system (applications)?
- Are there any feedbacks of clients using XIRIUM?
- Has the system been checked by an independent test institution?
For rearTWIST BNC cable connectors, use anti-kink boot part number BST-BNC-*
Color coding:
| 0 - | Black |
| 1 - | Brown |
| 2 - | Red |
| 3 - | Orange |
| 4 - | Yellow |
| 5 - | Green |
| 6 - | Blue |
| 7 - | Violet |
| 8 - | Grey |
| 9 - | White |
| CY | Turquoise |
For BNC chassis connectors with a "D" shaped housing use DSS-* or SCDP-*
- Home
- All Products
- News
- About Us
- Contact Us
- Support
- Downloads
- Video